[Feature]

◆ Built on 32 bits ARM technology running Linux operation system
◆ Support LAN (10/100Base T - TCP/IP) or Serial (RS485 or RS232) communication to PC Host.
◆ Support maximum of 8 doors with In and Out Wiegand/RS485 Reader through BS1000-5 Door Controller
◆ Support 100,000 Cards and 100,000 Records. Under the condition of 100,000 cards stored in the controller, the card search response time will not be compromised which is still lesser than one second for the last card found. 
◆ Support maximum of 5 serial communication levels
◆ Data store in 16MB NOR Flash that will not be lost even if powering off.
◆ Last 100,000 records can be resent to PC when the backend system database is damaged.
◆ Online update firmware by TCP/IP
◆ Monitor TTL inputs. To handle very secure requirement, all TTL input points can be configured to monitor four input states: Alarm, Normal, Fault-Short and Fault-Open.
◆ With PLC logic built-in, all advances configuration can be setup through PLC logic using XPLOC Designer. Engineer or Advance User is able to make any logic change or adjustment in the field without the need to change the program source code.
◆ It has 16 TTL DI, 8 relay output and 8 TTL DO on board to monitor alarm or status and control other equipment. If necessary, up to 16 BS1000-1 boards can be connected to BS610-4 to monitor status of up to 144 TTL inputs and control more devices
◆ Support Global and Nested APB control
◆ Support Super Master Card during Emergency or System Failure situation (BS1000-5 comm. Fail or BS610-4 fault). This card will be stored in BS1000-5 non-volatile memory (EEPROM) and will generate special record when presented. 
◆ Intelligence door lock control (door lock back immediately if system detect a door open and close condition irregardless of door release time setting). 
◆ Support Door sensor sensitivity adjustment (0-5 second)
◆ Enable/Disable Door only open by first card even Door is suppose to free by Timezone
◆ Enable/Disable Exit control by Timezone
◆ Enable/Disable Exit require PIN

[Fuctions]

[Installation Measurement]