Join favoritesContact us
Products
Location： Home|Development|Products|Hardware|TCP/IP Door Controller
Products Brand center
BS610-1 Controller 

  • Product overview:

    [Features]

    ◆Using 32 bit ARM CPU, operate on embedded LINUX OS, speed up to 200MHz

    ◆Direct connection to PC via TCP/IP. Connection via TCP/IP converter is not required.  Transmission speed up to 100 Mbps

    ◆Storage Capacity up to 10,000 cards and 100,000 transactions (BS610-1 can store up to 100,000 cards and 100,000 transactions)

    ◆Support ”Toggle Mode”, mainly use for controlling on/off of large-scale electrical equipment

    ◆Support Anti-passback with confirmation by door open

    ◆Support Arm/Disarm function

    ◆Using Flash Memory to store data.  Data can be stored up till 10 years without power supply

    ◆Recoverable up to the latest 100,000 transaction if back end system failure

    ◆Firmware Online Upgrade via TCP/IP

    ◆Smart Door Lock capability. When system detect door open and close back, door will automatically lock back

    ◆Programmable Time zone / Pin Access Control

    ◆CE Certified   

  • Detail parameters:

    [Functional List]

    Function

    Description

    Card Open Door

    Present card to wiegand reader

    Card+PIN Open Door

    (1)Use Controller with build-in reader

    (2)Connect with BS36K, BS361K keypad reader via wiegand (3)connectorOpen door either by enter Security PIN or Card ID

    (4)Open Door by Card + Pin: 4 digits PIN; By Security PIN: 8 digits PIN

    Security PIN Open Door

    Card ID Open Door

    Fingerprint Open Door

    Connect to BS fingerprint reader via wiegand connector. 

    Open door method include:

    Card + Fingerprint, ID + Fingerprint, Fingerprint + PIN, Card + 

    Fingerprint + PIN, ID + Fingerprint + PIN, Card Only, Card + PIN,

    PIN only, ID only etc.

    Connect External

    Wiegand Reader

    Support any 26/ 34 bit or free wiegand card reader

    Connect External

    Keypad Reader

    (1)Wiegand keypad reader

    (2) BS readers inclusive BS32, BS36K and BS361K keypad reader via wiegand connector

    Connect External

    BS Fingerprint Reader

    (1) Send the fingerprint corresponding card ID to controller via wiegand connector,

    (2) Support PC download fingerprint to 485 fingerprint reader via controller through TCP/IP.

    Connection to PC

    (1) 485 or TCP/IP

    (2) Use keypad to setup Controller ID 001-255

    (3) Use keypad to set IP Address, Subnet Mask and Gateway

    Alarm functions

    Support Door Left Open Alarm, Door Force Open Alarm, Temper Alarm and Local TTL Alarm

    Add/Delete Card

    in standalone mode

    Yes

    Dual-card Verification

    Yes

    Wrong PIN Control

    During Card + PIN operation, if PIN enter incorrectly for predefine times,

    controller will be disabled for a predefine duration

    Same Card Delay

    0-255 seconds. Factory default is 0 second.

    Time Zone Control

    32 set of time zone

    Holiday Control

    Yes

    Lost/Inhabit Card

    Yes

    Card Start and Expiry

    Date Validation

    Yes

    Door Auto Unlock by

    Timezone

    Yes

    Anti-passback

    Yes (Local or Global). Able to reset manually or by time and zone control

    Card Number Output Byte

    1-4 bytes. Default is 4 bytes

    Card Number Display

    Format

    HEX, DEC, ABA, User Code. Default is DEC

    Communication Monitoring

    Yes

    PIN and Timezone Control

    Yes. Able to setup whether enable PIN or Timezone control

    Tamper Alarm

    Yes

    Door Left Open Restore

    transaction

    Yes

    485 End of line resistor

    Through jumper setting

    Door Sensor Setting

    Door sensor setup including connection type, sensitivity,

    smart door lock control and record with confirm


    [Technical Specification]

    Parameter

    Description

    CPU

    32 bits ARM9 processor speed up till 200MHz

    Operating System

    LINUX

    Number of Door

    1

    Wiegand Reader Connect

    2

    Door Sensor

    1

    Exit Push button

    1

    TTL Alarm Input

    1

    Door Relay Output

    1, 12V/1A

    Alarm Relay Output

    1, 12V/1A

    TTL Alarm Output

    1, 5V/300mA

    Tamper Switch

    1

    Card Capacity

    100,000

    Card Response Time

    Based on 10,000 card stored, response time is less than 0.5 seconds

    Record Capacity

    100,000

    Serial COM Port

    2 COM port

    (1) COM1 – RS-485 communication to PC

    (2) COM0 – RS-232 , reserved by factory for debugging.

    TCP/IP

    1,10/100 Mbps auto switch, communicate with PC

    USB

    2 Master USB

    Keypad

    128x64 dots Graphical, White Backlight, Chinese,English

    4x4, Blue Backlight

    Buzzer

    Yes

    Power Supply

    9~30VDC, 300mA

    Operating Temperature

    -10~50℃

    Dimension

    129 x 180 x 62 mm

    Casing

    ABS flame-resistant

    Mounting

    Din rail mount


    [Model Selection]

    Model

    Description

    BS610-XXX-1

    Single door network controller

  • Installation mode:

    [Installation Measurement]


Hotline

Address：

Designed by