Function

Description

Card Open Door

Present card to external wiegand or 485 reader

Card+PIN Open Door

Connect with BS32, BS36K and BS361K keypad reader via wiegand or RS-485 connector

Open door either by enter Security PIN or Card ID

Open Door by Card + Pin: 4 digits PIN; By Security PIN: 8 digits PIN

Security PIN Open Door

Card ID Open Door

Fingerprint Open Door

Connect to BS fingerprint reader via wiegand connector. Access Mode can be set to: Card + Fingerprint, ID + Fingerprint, Fingerprint + PIN, Card +  Fingerprint + PIN, ID + Fingerprint + PIN, Card Only, Card + PIN, PIN only, ID only etc.

Connect External

Wiegand Reader

Support any 26/ 34 bit wiegand card reader and free wiegand card reader

Free Wiegand Setting

Yes. Able to configure card battery low-voltage alarm when using long range reader

Connect External

Keypad Reader

Wiegand keypad reader

BS range readers inclusive BS32, BS36K and BS361K keypad reader

Connect External

BS Fingerprint Reader

Yes, via wiegand port

Connection to PC

Via RS232, RS485 or TCP/IP (require TCP/IP converter)

Exit by Push Button

Yes

Door Force Open Alarm

Yes

Door Held Open Alarm

1-255 seconds. Factory default is 5 seconds. Alarm output can be disable

Add/Delete Card

in standalone mode

Yes

Multi-card Verification

Yes, up to 8 cards

Keypad Open Door

Through controller keypad. 

Wrong PIN Control

By flow control. Able to setup PIN enter incorrectly to lockout controller

or reader

Same Card Delay

0-255 seconds. Factory default is 0 second.

Time Zone Control

32 set of time zone

Holiday Control

Yes

Lost/Inhabit Card

Yes

Card Start and Expiry

Date Validation

Yes

Door Auto Unlock by

Timezone

Yes

Dynamic Storage Adjustment

Yes

Connect External Printer

Yes

Alarm and Event Output

Via 3rd Serial Port

Anti-passback

Yes (Local or Global). Able to reset manually or by time

Anti Tailgating

Yes

Time Error Correction

Yes

Card Number Output Byte

1-4 bytes. Default is 4 bytes

Card Number Display Format

HEX, DEC, ABA, User Code. Default is DEC

Communication Monitoring

Yes

PIN Control

Able to setup Exit without PIN Control. Factory default is Yes.

Timezone Control

Able to set to Exit without Timezone Control. Factory default is Yes.

Tamper Alarm

Build-in tamper switch.  If device is opened, controller will send an alarm record to back end PC.

Door Left Open Restore

transaction

Yes

485 Comm Terminating

Resistor

Via jumper setting

Auto Monitoring

Yes (Auto DI)

Auto Control

Yes (Auto DO)

485 Reader ID

Able to modify 485 Reader ID via controller

Reader & Controller Relation

Able to modify

Door Sensor Alarm Channel

Able to modify

Cancel TTL changes

follow door sensor

Yes

Door Interlock

Able to setup 2 or more interlocking door

Model

Description

BS600-XXX-2

2 door controller, RS485 comm to PC

BS600-XXX-3

4 door controller, RS485 comm to PC