-
Location：
Home|Development|Products|Hardware|RS485 Door Controller
-
Product overview:
[Features]
◆Single door controller, control IN/OUT of one door◆Storage Capacity up to 10,000 cards and 10,000 transactions
◆Standalone Operation or Communicate with PC via RS-232, RS-485 or TCP/IP (via TCP/IP converter)
◆Running on 16 bit CPU at 8MHz
◆Support “Toggle Mode”, mainly use for controlling on/off of large-scale electrical equipment
◆Support Anti-passback
◆Support Anti-tailgating
◆Support Arm/Disarm function
◆Programmable Time zone / Pin Access Control
◆Support any 3rd party external Wiegand Reader or Keypad Reader
◆Recoverable up to the latest 10,000 transaction if back end system failure
◆CE Certified
-
Detail parameters:
[Functional List]
Function
Description
Card Open Door
Present card to external or build-in wiegand reader
Card+PIN Open Door
Use with Controller with build-in reader
Connect to external wiegand keypad reader: BS36K, BS361K
Open door either by enter Security PIN or Card ID
Open Door by Card + Pin: 4 digits PIN; By Security PIN: 8 digits PIN
Security PIN Open Door
Card ID Open Door
Connect External
Wiegand Reader
Support any 26/ 34 bit wiegand card reader and free wiegand card reader
Free Wiegand Setting
Yes. Able to configure card battery low-voltage alarm when using long range reader
Connect External
Keypad Reader
Wiegand keypad reader
BS36K/BS361K keypad reader
Connect External
BS Fingerprint Reader
Yes, via wiegand port
Connection to PC
Via RS232, RS485 or TCP/IP (require TCP/IP converter)
Exit by Push Button
Yes
Door Force Open Alarm
Yes
Door Held Open Alarm
1-255 seconds. Factory default is 5 seconds. Alarm output can be disable
Add/Delete Card
in standalone mode
Yes
Multi-card Verification
Yes, up to 8 cards
Keypad Open Door
Through controller keypad. Factory default is “No”.
Wrong PIN Control
During Card + PIN operation, if PIN enter 3 times incorrectly will disable
the controller for 30 seconds
Same Card Delay
0-255 seconds. Factory default is 0 second.
Time Zone Control
32 set of time zone
Yes
Lost/Inhabit Card
Yes
Card Start and Expiry
Date Validation
Yes
Door Auto Unlock by
Timezone
Yes
Anti-passback
Yes (Local or Global). Able to reset manually or by time
Timing Event
(Alarm Clock)
Yes
Alarm arming/disarm
Yes
Anti Tailgating
Yes
Time Error Correction
Yes
Card Number Output Byte
1-4 bytes. Default is 4 bytes
Card Number Display
Format
HEX, DEC,
Communication Monitoring
Yes
Internal Buzzer Alarm
Able to setup trigger alarm buzzer when door force open or door held open
alarm. Factory default is “No”.
PIN Control
Able to setup Exit without PIN Control. Factory default is Yes.
Timezone Control
Able to set to Exit without Timezone Control. Factory default is Yes.
Tamper Alarm
Build-in tamper switch. If device is opened, controller will send an alarm record to back end PC.
Door Left Open Restore
transaction
Yes
485 Comm Terminating
Resistor
Via jumper setting
[Technical Specification]
Parameter
Description
CPU
16 bits, 8MHz
RAM
512K Bytes
Flash
256K Bytes
Number of Door
1
Wiegand Reader Connect
2
TTL Alarm Input
1
Door Sensor
1
Exit Push button
1
TTL Alarm Output
1, 5V/300mA
Alarm Relay Output
1, 12V/10A
Door Relay Output
1, 12V/10A
Tamper Switch
1
Card Capacity
10,000
Record Capacity
10,000
2, 1x485 connect to PC, 1x232 connect to serail printer or PC
Baud Rate
1200~19200 bps. Default is 19200 bps
Controller ID Setting
001~255.Default is 1
Data Backup
Rechargeable. Without main power able to save the data up to 6 months
Keypad
3x4, Blue Backlight
LCD
16x2 line, Blue Backlight, English Menu
Buzzer
1, audible sound able to distinguish valid and invalid card
Power Supply
9~30VDC, 300mA
Operating Temperature
-10~50℃
Dimension
129 x 190 x 64 mm
Casing
ABS flame-resistant
Mounting
Din rail mount
[Model Selection]Model
Description
BS600-XXX-1
Single door controller
-
Installation mode:
[Installation Measurement]
