-
Location：
Home|Development|Products|Hardware|Fingerprint Products
-
Product overview:
[Features]
◆ Built on 32 bits ARM technology running Linux Operating System @ 200MHZ
◆ Direct TCP/IP connection to PC Host，need not require TCP/IP converter, Transmission Speed @ 100M
◆ Store up to maximum 1,900 fingerprint templates，matching speed <1 seconds; Expandable to 9500 templates on board
◆ Maximum 100,000 Card Holders and 100,000 lines transaction
◆ Up to a maximum of 10 templates for each user. Support duress alarm using 2nd template
◆ Sensor type: Optical or Capacitive (for fulfilling different environment)
◆ FAR: Adjustable from 1/10,000 to 1/100,000,000 (FAR and FRR are diametrically opposed, increasing FAR will lower FRR and vice versa, e.g. FAR = 0.01%, FRR ~ 1%)
◆ EER < 0.1% (Equal Error Rate is a figure describing at what probability FAR and FRR is equal; the risk of accepting an impostor is equally as small as the risk of rejecting a legitimate user)
◆ Rapid matching
◆ Consists of Dual Finger Verification, Timezone Control, Anti-passback, Door Interlocking, Multi-card Verification etc
◆ Operation Mode: Fingerprint Only, Card + Fingerprint, ID + Fingerprint, Fingerprint + PIN, Card + PIN, PIN Only and etc.
◆ Support built-in EM, Mifare, HID125 KHZ proximity , HID 13.56 MHz iCLASS and TI card reader
◆ Maximum 2 templates can be stored in Mifare Card
◆ Offline enabled. Connection with computer can be via RS-232, RS-485 or TCP/IP
◆ Recoverable up to 100,000 lines of transaction
◆ Display Card Holder's Name, Employee ID and Time
◆ CE Certified -
Detail parameters:
[Functions]
Functions
Description
Operation Mode
Fingerprint Only, Card + Fingerprint, ID + Fingerprint, Fingerprint + PIN、Card + Fingerprint + PIN，ID + Fingerprint + PIN, Card Only,PIN Only, Card + PIN，ID Only
Connect External Wiegand Reader
Yes
Free Wiegand Setting
Yes
Connect External Keypad Reader
Wiegand Keypad Reader
Connect External BS Fingerprint Reader
Yes，via wiegand connector. Attach fingerprint reader to fingerprint controller via RS485 to ease PC Host to transfer fingerprint template from controller to reader
Communicate with Computer
(1) RS-232 or 485 (via jumper setting) or TCP/IP
(2) Setup ID 001-255 using keypad
(3) Setup IP Address, Gateway and Subnet Mask using keypadOffline Enrollment
Yes
Online Download Fingerprint Template
Yes
Read Fingerprint Template from Card
Yes, support using Mifare Card
Write Fingerprint Template to Card
Fingerprint Controller with built-in Mifare Card Reader can directly write template to card and defined storage sector
Fingerprint Backup Tools
Used to backup fingerprint template from reader to computer
Fingerprint Identification Security Level
Setting from 1-5, Default is 2.
The higher the level, the more secure it will be but matching time will be longer
Fast Matching Mode
Can be set up to 6 levels.
The larger the number, matching will be faster and will also increate the FRR rate.
Auto-match
Can be set to auto-match
Dual-finger Mode
Require 2 fingers during identification
Alarm Finger
Yes
Push Button Open Door
Yes
Door Force Open Alarm
Yes
Door Open Too Long Alarm
Can be set from 1-255 seconds. Default is 5 seconds. Can be disabled
Other Functions
Inherits functions from BS511 Single Door Controller
[Technical Specification]
Parameters
Description
CPU
ARM9，processing speed up to 200MHZ
Operating System
Linux
Fingerprint Capacity
1900 templates. Expandable to 9500 templates on board
Matching Time
<1 seconds
FAR
Adjustable between 1/10,000 ~ 1/100,100,100
EER
<0.1%
No. of templates per person
10
Control No. of Doors
1
Connect Wiegand Reader
2
Door Sensor
1
Push Button Signal
1
TTL Alarm Output
1
Door Relay
1, 12V/1A
Alarm Relay
1, 12V/1A
TTL Alarm Output
1, 5V/300mA
Anti-passback
1
Card Holder Capacity
100,000
Card Matching Speed
<0.5 seconds when 100,000 cards in controller
Transaction Capacity
100,000 lines
COM Port
2 ports, via jumper setting to determine RS-232/485
TCP/IP
1, 10/100M to communicate with computer
USB
2, Master USB
Keypad
128x64 dots LCD, 4x4 keypad
Buzzer
Yes
Clock Power Supply
CR2015,3V
Power Supply
9-30V/400mA
Operation Temperature
-10~50 ℃
Dimension
132×132×49mm
Casing
ABS flame-resistant
[Choosing a Model]
Model No.
Description
BS364
Network-based Fingerprint Controller
BS364-E
Network-based Fingerprint Controller with EM Reader, Optical Sensor
Reading Distance: >10cm
BS364-M
Network-based Fingerprint Controller with Mifare Reader, Optical Sensor
Reading Distance: >2.5cm
BS364-H
Network-based Fingerprint Controller with HID125 KHZ proximity Reader, Optical Sensor
Reading Distance: >4cm
-
Installation mode:
[Installation Measurement]
