-
Location：
Home|Development|Products|Hardware|Fingerprint Products
-
Product overview:
[Features]
◆ Can store up to 1900 fingerprint，matching time < 1 second. Expandable to 9500 templates on board
◆ Maximum storage: 10,000 Card holder, 10,000 Transaction
◆ Up to a maximum of 10 templates for each user. Support duress alarm using 2nd template
◆ Sensor type: Optical or Capacitive (for fulfilling different environment)
◆ FAR: Adjustable from 1/10,000 to 1/100,000,000 (FAR and FRR are diametrically opposed, increasing FAR will lower FRR and vice versa, e.g. FAR = 0.01%, FRR ~ 1%)
◆ EER < 0.1% (Equal Error Rate is a figure describing at what probability FAR and FRR is equal; the risk of accepting an impostor is equally as small as the risk of rejecting a legitimate user)
◆ Rapid matching
◆ Consists of Dual Finger Verification, Timezone Control, Anti-passback, Door Interlocking, Multi-card Verification etc
◆ Operation Mode: Fingerprint Only, Card + Fingerprint, ID + Fingerprint, Fingerprint + PIN, Card + PIN, PIN Only and etc.
◆ Support EM, Mifare, HID125 KHZ proximity , HID 13.56 MHz iCLASS and TI card reader
◆ Maximum 2 templates can be stored in Mifare Card
◆ Offline enabled. Connection with computer can be via RS-232, RS-485 or TCP/IP
◆ Recoverable up to 10,000 lines of transaction
◆ CE Certified -
Detail parameters:
[Functions]
Functions
Description
Operation Mode
16 bits
Connect External Wiegand Reader
Can be connected to external wiegand card reader
Free Wiegand Setting
Yes
Connect to External Keypad Reader
wiegand keypad reader
Connect to BS Fingerprint Reader
Yes, via wiegand connecter
Communicate with Computer
RS-232, RS-485 or TCP/IP(require TCP/IP converter)
Off-line Enrolment
Yes
Online download fingerprint
Yes
Read/Write Fingerprint Templates to/from Card
1. Write template directly to Mifare Card if reader is build-in Mifare reader
2. Via 232 connect to Mifare reader to write template to card.
3. Each Mifare card can store maximum 2 templates
4. Defined storage sectorFingerprint backup tool
Used to backup fingerprint template from reader to computer
Fingerprint Identification Security Level
Setting from 1-5, Default is 2.
The higher the level, the more secure it will be but matching time will be longerFast Matching Mode
Can be set up to 6 levels.
The larger the number, matching will be faster and will also increate the FRR rateAuto-match
Can be set to auto-match
Dual-finger Mode
Make use of 2 finger during identification
Alarm Finger
Yes
Push Button Open Door
Yes
Door Force Open Alarm
Yes
Door Open Too Long Alarm
Can be set from 1-255 seconds. Default is 5 seconds. Can be disabled
Other Functions
Inherits functions from BS501Chinese Series Single Door Controller
[Technical Specification]
Parameters
Description
CPU
16 bits
Storage Capacity
1900 templates. Expandable to 9500 templates on board
Matching Time
<1 seconds
FAR
Adjustable between 1/10,000 ~ 1/100,100,100
EER
<0.1%
No. of templates per person
10
Control No. of Doors
1
Connect Wiegand Reader
2
TTL Alarm Input
1
Door Sensor
1
Push Button Signal
1
TTL Alarm Output
1，5V/300mA
Alarm Relay
1，12V/1A
Door Relay
1，12V/1A
Anti-passback
1
Card Holder Capacity
10,000
Transaction Capacity
10,000
COM Port
2，one via RS-485 to computer, the other one via RS-232 to printer or computer ( 3rd Port can also be set as RS-485 Connecter)
Baud Rate
1200-19200bps，default 19200bps
Controller ID Setting
001-255, default is 11
Rechargeable Battery
Data can be kept for 6 months during power failure
Keypad
4x4 keypad with brightly blue backlight
LCD
128x64 dots, support bilingual with brightly white backlight
Buzzer
1, Valid and Invalid Card Indicator
Power Supply
9-30VDC,300mA
Operation Temperature
-10~50 ℃
Dimension
132×132×44mm
Casing
ABS flame-resistant
[Choosing a Model]
Model No.
Description
BS362
Fingerprint Controller with Optical Sensor
BS362-E
Fingerprint Controller with EM Reader, Optical Sensor
Reading Distance>2.5cmBS362-M
Fingerprint Controller with Mifare Reader, Optical Sensor
Reading Distance>2.5cmBS362-H
Fingerprint Controller with HID125 KHZ proximity Reader, Optical Sensor
Reading Distance>4cm
Remarks：
(1) FOP represent Optical sensor. If Capacitive sensor is used change FOP caption to FCP (2) If 9500 templates storage capacity required, please indicate (9500) to be added to the model numbere.g BS362(9500)
-
Installation mode:
[Installation Measurement]
